The GMT100 is a durable water resistant GPS tracker designed for motorcycle, boats, and any other mobile assets tracking applications. With superior receiving sensitivity, fast TTFF ( Time to First Fix ) and Quad band GSM frequencies 850/900/1800/1900MHz, its location can be monitored in real time or periodically tracked by a backend server or other specified terminals. GMT100 has multiple input/output interfaces which can be used for monitoring or controlling external devices. The GMT100 can communicate with a backend server through the GPRS/GSM network to transfer reports of emergency, Geo-Fence boundary crossings, low battery or scheduled GPS position along with many other useful functions.
Please contact us [info@motomon.com] for full details and to discuss your specific GPS tracking requirements.
-
Wide operation voltage range 8 to 32V DC
-
Built in u-blox GPS chipset with -162dBm tracking sensitivity,-148dBm autonomous sensitivity for fast TTFF and high accuracy
-
Low power consumption, long standby time with internal battery
-
Quad band GSM/GPRS frequencies 850/900/1800/1900MHz
-
Embedded full-featured @Track protocol
-
Multiple input/output interfaces for monitoring and control
-
Built in 3-axis accelerometer for power saving and motion detection
-
Power consumption can be fully configured
-
Three working power mode
-
Water Resistant, IPX6 Compliant
-
CE certified
GSM Specifications
| Frequency | Quad band: 850/900/1800/1900MHz Compliant to GSM phase 2/2+ -Class 4 (2W @ 850/900MHz) -Class 1 (1W @ 1800/1900MHz) |
| GPRS | GPRS multi-slot class 12 GPRS mobile station class B |
| RMS Phase Error | 5 deg |
| Max Out RF Power | 33.0dBm±2dBm |
| Dynamic Input Range | -15~-108dBm |
| Receiving Sensitivity | Class ⅡRBER2%(-107dBm) |
| Stability Of Frequency | < 2.5ppm |
| Max Frequency Error | ±0.1ppm |
GPS Specifications
| GPS Chipset | u-blox All-In-One GPS receiver sensitive, fast and accurate |
| Sensitivity | Autonomous: -148dBm Hot start : -160dBm Tracking: -162dBm |
| Position Accuracy | Autonomous: <2.5 m SBAS : 2.0 m |
| TTFF (Open Sky) | Cold start :30s average Warm start <30s Hot start <1.2s |
Interfaces
| Digital Inputs |
Two digital inputs
One positive trigger for ignition detection
One negative trigger input for normal use
|
| Configurable Input | One special input can be configured to negative trigger digital input or analog input |
| Digital Output | One digital output, high side 750mA max |
| Relay output | One relay output by a normally open relay with two connections Drive current max 20A@DC12V |
| GSM/GPS Antenna | Internal only |
| Indicator LED | GSM,GPS and power |
| Mini USB port | Mini USB port for upgrading and debugging |
General Specifications
| Dimension | 86mm*62mm*26mm |
| Weight | 148g |
| Backup Battery | Li-Polymer 1300mAh |
| Operation Voltage | 8 to 32V DC |
| Standby Time | Without reporting: 330 Hours 5 minutes reporting: 147 Hours 10 minutes reporting: 172 Hours |
| Operation Temperature | -30℃~+80℃(Without battery) -40℃~+85℃ for Storage(Without battery) |
| Power Management |
Three working mode Zero power consumption when ignition is off |
Air Interface Protocol
| Transmit Protocol | TCP, UDP, SMS |
| Scheduled Timing Report | Report position follow the pre-set fix interval and report interval |
| Geo-Fence | Geo-Fence alarm and parking alarm |
| Low Power Alarm | Alarm when backup battery is low |
| Power On Report | Report when the device is powered on |
| Tow Alarm | With built in 3-axis accelerometer |
| Special Alarm | Special alarm based on the digital/analog inputs |
| Remote Control | Control the digital outputs through air interface protocol |