GT500 is a powerful GSM/GPS/WiFi tracker for personal tracking. With superior receiving sensitivity, fast TTFF and Quad band GSM frequencies 850/900/1800/1900MHz, its location can be monitored in real time or periodically reported by a backend server or other device. Based on the embedded @Track protocol the GT500 can communicate with the backend server through the GPRS/GSM/WiFi network to transfer reports of emergency/SOS, Geo-Fence boundary crossings, low battery or scheduled GPS position, cell ID or WiFi access point Mac address among other advanced features. Users can easily to dial preset phone number by using user define button or the SOS button. System Integrators can easily communicate with the GT500 by using the @Track protocol. The WiFi access point Mac address reporting will help of accurate in-door location fix with WiFi access.

 

 

 

 

 

 

 

 

 

Feature: 
  • Built in uBlox GPS chipset with -162dBm tracking sensitivity, –148dBm autonomous sensitivity for fast TTFF and high accuracy
  • Built in MTK WiFi chipset with IEEE 802.11g/b compliant
  • Quad band GSM/GPRS frequencies 850/900/1800/1900MHz
  • Embedded full-featured @Track protocol
  • Low power consumption, long standby time with internal battery
  • Built in 3D motion sensor for power saving and motion detection
  • Built in GSM/GPS/WiFi antennas

 

Specification: 

GSM Specifications

Frequency Quad band: 850/900/1800/1900MHz
Compliant to GSM phase 2/2+
-Class 4 (2W @ 850/900MHz)
-Class 1 (1W @ 1800/1900MHz)
GPRS GPRS multi-slot class 12
GPRS mobile station class B
RMS Phase Error 5 deg
Max Out RF Power 33.0dBm±2dBm
Dynamic Input Range         -15~-108dBm
Receiving Sensitivity Class ⅡRBER2%(-102dBm)
Stability Of Frequency < 2.5ppm
Max Frequency Error ± 0.1ppm

 

GPS Specifications

GPS Chipset uBlox All-In-One GPS receiver sensitive, fast and accurate
Sensitivity Autonomous: -148dBm
Hot start: -160dBm
Tracking: -162dBm
Position Accuracy                 Autonomous: <2.5m
SBAS : 2.0m
TTFF (Open Sky) Cold start: 30s average
Warm start: <30s
Hot start: <1s

 

WiFi  Specifications

WiFi Chipset                         MTK MAC/BB WLAN chip
Frequency 2.4G-2.497GHz
Compatible IEEE 802.11g/b compliant

 

Interfaces

Power Button Power on or off device
Volume Button Two sides buttons to increase/decrease volume
Dial / Reject Button         Dial or reject incoming call
SOS Button SOS/Emergence
GEO Button For GEO-Fence function
User Define Button              For User-define function
Mini USB Interface For external power and configuration
Earphone Interface For earphone
Indicator LED GSM,GPS, WiFi and battery status

 

General Specifications

Dimension: 94mm*48.5mm*18mm
Weight: 90g
Battery: Li-ion 1000 mAh
Standby Time Without reporting : 180 Hours
5 minutes reporting : 90 Hours(GPRS); 40 Hours(WiFi)
10 minutes reporting : 100 Hours(GPRS); 50 Hours(WiFi)
Charge Voltage 5V DC
Operation Temperature       -20℃~+55℃

 

Air Interface Protocol

Transmit Protocol TCP, UDP, SMS
Scheduled Timing Report     Report position follow the pre-set fix interval and report interval
Geo-Fence 5 Geo-Fence regions can be defined
Low Power Alarm Alarm when backup battery is low
Power On Report Report when the device is powered on
Power Off Report Report when the device is powered off
Non-Movement Detection Movement alarm based on built in 3D motion sensor
Fall Detection Falling alarm based on built in 3D motion sensor